Matters Needing Attention Wiring Circuit
8. The washing machine must not be used in | 9. The washing machine should be place in |
the open or in area of high moisture as water | a well ventilated area maintaing a space |
droplets may form on electrical components, | between walls or furniture. |
Air dry the appliance if the washing machine |
|
components become wet. |
|
10. Keep away from heat sources and direct | 11. During installation, ensure that the electric |
sunlight to prevent plastic and rubber com- | cable is not trapped by the washing machine and |
ponents from aging. | avoid damage to the electric cable. |
| Dear customer, For the machine and your own |
| security, DO NOT REPAIR IT BY YOURSELF! |
| DO NOT USE THE WASHING MACHINE |
| WHICH SOME PARTS ARE LOST! |
===Use
1. Make sure that the washing machine is | 2. After turning the power off, turn the pro- |
securely connected to the water supply, | gram knob clockwise to set washing |
take the necessory precautions or contact | program. |
the local service center if the connection |
|
is poor or there is a water leakage. |
|
|
|
I1: Power Switch | EVC: Hot Water Valve |
I2: Economic Wash Switch | EVP,EVL: Cold Water Valve |
I3: No Spin Switch | P1,P2: Pressure Switch |
TM: Timer Motor | THR: Adjustable Thermostat |
H: Heating Element | D: Drain Pump |
C:Capacitance | S,W:Motor |
2 | 15 |