Haier 50FREE-1 user manual Push operation button, Description of operation button

Page 9

5 Push operation button

aDescription of operation button

Check the connection between the water inlet hose and the water tap

Indicator mode and meaning

Off

Flashing, indicating the running program

On, indicating the program about to run or

the selection mode

Start/paush button

Child lock function

Push and hold the reserve button and spin button, then push down the power on/off button .The digitron displays C L .You can continue setting desired washing procedures. After setting ,push down the start/pause button. The child lock function is activated. all of the buttons are locked and cannot make selection .

Release the child lock function :push down reserve button and spin button at the same time for more 2 seconds .After a beep sound ,the child lock function is released.

1.Swaying the hose gently to confirm if it is fastened stable.

2.After installation, open the tap to check if it leaks. 3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection between the water inlet hose and the water tap is firm,

After the power is switched on,press it to start the machine

During working,push it to pause. During pause,push this button to restart and go on working

Sterilize

 

Soak

 

 

 

 

 

 

 

 

 

 

 

 

Start

 

Pause

Soak

 

Wash

 

Rinse

 

 

 

20

 

Thrice

 

 

 

 

 

 

15

 

Twice

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

Wash

Rinse

 

 

Sterilize

Spin

Spin

Lock

so as to prevent dropping from improve Installation position.

Take down the water inlet hose

1.After using,Close the water tap.

2. Pull off the water inlet hose from the water tap and washer

"Soak" button

Push "soak" button to set soak procedure.

In standard, carpeting programs, push "soak" button to set different soak time (10, 20, 30 minutes)

In fibre programs, push "soak" button to set soak procedure, but soaktime can not be changed. In saving and superfast wool programs, pushing "soak" button has no effect.

"Wash" button

Push "wash" button to set wash procedure.

In standard,carpeting programs, push "wash" button to set different wash time (0 6 9 15 20 minutes)

In fibre programs, push "wash" button to set wash procedure, but washtime can not be changed.

In saving and superfast wool programs, pushing "wash" button has no effect.

Push this button for 2 seconds or longer, the sign of "sterilizate "will be lightened. That mean that function is chosen.

"Rinse/Sterilize" button

Push "rinse/sterilize"button to set rinse procedure.

In standard,carpetingprograms, push "rinse" button toset different rinse times (0, 1, 2, 3 ) In fibre programs,push the "rinse/sterilize"button to set rinseprocedure, but rinse times can not be changed.

In saving and superfast wool programs, pushing "rinse" buttonhas no effect.

Push this botton for 2 seconds or longer the sign of Sterilize

will be lightened,that mean the function is chosen

Push this botton for 2 seconds again will clear this function ,the sign will be turued off

"Spin" button

Push "spin" button to set spin procedure.

In standard, carpeting programs, push the "spin" buttonto set different spin time (0 1 3

5 7 minutes).

In fibre programs, push the "spin" buttonto set spin procedure.

In saving and superfast wool programs,pushing "spin" button has no effect.

Image 9
Contents Fully Automatic Washing Machine Contents Names of the parts OneDrain hose frame Do not use water hotter than Safety precautionsInfluence your use Disposal after washingInstall the inner cover Installation and adjustmentHow to change the direction of the drain hose Reserve, remain time digitron Install the water inlet hoseDescription of operation button Push operation buttonAfter adding, close the box Put in the laundries