Install the water inlet hose

1.Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1)

NOTE: Do not over tighten. Damage to the valves can result.

Reserve, remain time digitron

It displays "--" during detecting.

It displays remained reserve time (hour).

It displays total remained time (min).

It displays abnormal symbol in abnormal situation. (See to Page15)

"Power" button

Push the "power" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "power" button to switch on the power. If the "start/pause" button is not pushed, the machine will switch off the power automatically after 5 minutes.

2. Connect the other ends to the water inlet valve .

( As figure 2)	Figure 1
( As figure 2)
	Jointer of the water inlet hose

Jointer of the
water inlet valve	Figure 2
	Figure 2
Water absorption cushion

Reserve

42L		45L


36L		39L


29L		32L

22L		26L


14L		18L

Water level

carpeting	Standard	Air dry

Fibre	Save

Wool	Superfast

	-Dry
me	Air
Progra

Power

"Air-Dry"button

Push the "air-dry"button ,then the "air-dry"indicator light is on, that means the "air-dry"program is chosen. The purpose is drying laundrie at the same time can dry the outer tub and the inner tub , which can avoid growing mildew on the outer tub and the inner tub. The max drying capacity of the fibre laundrie is 1.5 kg.

"Reserve" button

The digitron displays remain time before washing is finished (in minutes)

Push "reserve" button, the digitron displays the reserve time of washing (in hours). The indicator flashes to indicate that the reserve function

is operating.

Push "reserve" button to display the reserve mode.

"Water level" button

The washing machine can detect the laundries automatically in standard program.

After detection,it will set the water level to suitable value among 4, 6, 8,and 10 automatically.

You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting.

If there's water inside the tub, the machine cannot detect the laundries and will display water level 32L .

If wet laundries are put in, it may display water level 45L . You must set suitable water level by yourself.

If superfast program is selected, it will display water level 22L . When water level 18L is reached in water filling, it will perform washing while filling water.When water level 22L is reached, it will change to normal washing.

During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.

The water level decided may be different from actual value because of the different moisture level of the laundries.

"Program" button
Following full-auto program is available

Program	Application
Standard	Common washing

Save	washing for light-soil saving laundriesl
Superfast	Washing for light-soil	a few laundries

	washing for carpet or heavy thickness
Carpeting	and damnify large laundries--usually
	under 3kg
Fibre	washing for fibre	laundries
	For silk textiles slap-up laundries

Wool

usually under 2.5kg

Remark:

If you want to wash wool silk or other top grade laundries ,please select wool program