*Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level.
*Spin time: the time from intermittent running to finishing
*When selecting "
3.Adjust the "water level “ knob to select suitable water level
Three water levels available according to the laundries quantity: High; Medium; Low.
Page 11
| After the water inlet as per the | preset water level, in case additional water | |||||
| quantity is required, please first set | the button to the "Reset", push and hold it | |||||
| to perform automatic water inlet. When it reaches the suitable water level, you | ||||||
| can turn it to the needed water level. | ||||||
| After the water inlet under set water level, if higher water level is needed, please | ||||||
| first turn the knob to " Reset ", then turn back to needed water level. The wash- | ||||||
| ing machine will fill water to the new water level. | ||||||
|
|
|
|
|
|
| |
4 Press the "Start/Pause" button | |||||||
|
| Start |
| ||||
| Pause |
|
| ||||
|
| ||||||
5 Close the top lid | 6 The washing is finished |
If you open the top lid, the machine
will stop working before spinning
When the washing is finished, the three indicators of "Wash" "Rinse" "Spin" are all on.The power will be switched off automatically about 10 minutes after the finishing of the washing.