Haier XQB60-68 user manual Safety precautions, Wet laundries on the control panel

Page 4

Safety precautions

Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be insert- ed and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned orwhen it

is idle.

Earth

If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department. Keep the pin of the power plug clean.

Do not put the machine at damp

Do not use water hotter than 50 C .

place like

the bathroom . Never

 

 

 

wash it

with water. Do not place

 

 

 

wet laundries on the control panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In case the washing machine

is in-

Do not wash water-proof laundries like

stalled on ground with carpet,

do not

the raincoat, bike covers etc. to avoid

block the ventilation hole with carpet.

abnormal vibrations in spinning.

 

 

 

 

 

 

 

The ventilation holes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

at the bottom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

Image 4
Contents Fully automatic washing machine Specification ContentsNames of the parts Back coverSafety precautions Wet laundries on the control panelDismantle Install Installation and adjustment Install the bottom plateAdjust the installation position Install the lint filterHow to change the direction of the drain hose Install the water inlet hose Confirm the water faucetDismantle the water inlet hose 1Preparation before washing Pay attention to followings before washing the laundriesHow to use the whitener How to use the washing powderDescription of the function of the knobs and buttons Mode and meaning of the indicatorsStart/Pause button Power botton Push the Power button to switch on the powerSelection method of the procedure programs Adjust the water level knob to select suitable water level Press the Start/Pause buttonAfter each using Disposal after washingCommon phenomena Phenomenan Reason How to settlePhenomena Explanation Paching list Name Quantity One piece Components Water inlet hoseWashing Powder BOX