Connection between the water inlet hose and the washing machine
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
2.Put the nut of the water inlet hose on the valve jointer.
3.Fasten the nut. Swing it gently to confirm if it's suitable.
Nut of the water I nlet hose
Water absorption cushion
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet |
|
|
|
| Jointer of the | ||
|
|
| |||||
hose into the jointer. |
|
|
|
|
|
| |
|
|
|
| water inlet hose | |||
2.Hang the lock lever to the jointer. Release |
|
|
|
|
| ||
|
|
|
|
|
| ||
the slider till a click sound is heard. | Locking lever |
|
|
| Slider |
|
|
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened
stable.
2.After installation, open the faucet to check if it leaks. 
3.Do not bend the hose with overstrain.
4.Each time before use please check if the 
connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking lever 
Slider