Haier XQB60-68 user manual Disposal after washing, After each using

Page 16

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

Clean the detergent box and set it on the control panel seat.

The lint filter must be used during washing.

It must be cleaned in time after each using

Lint filter:

1.Pull it up to dismantle. 2.Push it down to install.

3.Clean the filter screen after washing.

Install

Dismantle

Clean

The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months.

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent. Do not wipe it with thinner, petrol, alcohol etc.

Petro

l

 

 

Alcohol

 

 

 

 

 

 

Thinn

er

 

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely

after each using.

3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

Image 16
Contents Fully automatic washing machine Specification ContentsNames of the parts Back coverSafety precautions Wet laundries on the control panelDismantle Install Installation and adjustment Install the bottom plateAdjust the installation position Install the lint filterHow to change the direction of the drain hose Install the water inlet hose Confirm the water faucetDismantle the water inlet hose 1Preparation before washing Pay attention to followings before washing the laundriesHow to use the whitener How to use the washing powderDescription of the function of the knobs and buttons Mode and meaning of the indicatorsStart/Pause button Power botton Push the Power button to switch on the powerSelection method of the procedure programs Adjust the water level knob to select suitable water level Press the Start/Pause buttonAfter each using Disposal after washingCommon phenomena Phenomenan Reason How to settlePhenomena Explanation Paching list Name Quantity One piece Components Water inlet hoseWashing Powder BOX