GE 500A436P006 Adding Elbow for Exhaust Through Bottom of Cabinet, Servicing

Installation Instructions

ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET

. Insert die elbow dn'ough		the	rear	opening		and	connect
it to tile dlyer internal	duct.
. Apply duct tape oil	the joint		between		tile	dryer	internal
duct and elbow, as shown		on	page	7.

CAUTION:

Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard.

[_ CHANGING DIRECTION OF DOOR OPENING

REMOVE4 HOLEPLUGSAND

REMOVE4PLACETHEMINTHEHOLES

HINGESCREWS.ONTHEOPPOSITESIDE.

ADDING COVER PLATE TO REAR

OF CABINET

ROTATEDOOR1800

ANDREINSTALL.

PLATE

(KIT WE1M454)

Comlect standard metal elbows and ducts to complete rile

exhaust system. Cover back opening with a plate (Kit

WE1M454) available Kom your local service provider.

Place dryer in final iocauon.

,_ WARNING- NEVER LEAVE THE BACK OPENING WITHOUT THE PLATE.

[_ SERVICING

_k WARNING- LABEL ALL WIRES

PRIOR TO DISCONNECTION WHEN

SERVICING CONTROLS. WIRING

ERRORS CAN CAUSE IMPROPER AND

DANGEROUS OPERATION AFTER

SERVICING/INST ALLATION.

For replacement parts and other infornmtion, refer to

Owner's Mammi for servicing phone mmfl)ers.

For Quesdons on Installadon, Call: 1-800-626-2000 (US) or

500A436P006 1-800-561-3344 (Canada). Pub. # 31-16225 8