Final Installation Check

SPECIAL REQUIREMENTS FOR MANUFACTURED OR MOBILE HOMES

Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards Title 24 CFR, Part 32-80 or Standard CAN/CSA0Z240 MH and local codes and ordinances. If you are uncertain whether your proposed installation will comply with these standards, please contact a service and installation professional for assistance.

•A gas dryer must be permanently attached to the fl oor.

•The electrical connection for an electric dryer must be a 4-wire connection. More detailed information concerning the electrical connection is provided in the section Connecting Electric Dryers.

•To reduce the risk of combustion and fi re, the dryer must be vented to the outside.

•DO NOT vent the dryer under a manufactured home or mobile home.

•Electric dryers may be vented to the outside using the back, left, right, or bottom panel.

•Gas dryers may be vented to the outside using the back, left, or bottom panel. Gas dryers may not be vented to the outside using the right side panel because of the burner housing.

•The dryer exhaust duct must be affi xed securely to the manufactured or mobile home structure, and the exhaust duct must be made of a material that will resist fi re and combustion.

It is recommended that you use a rigid or fl exible metal duct.

•DO NOT connect the dryer exhaust duct to any other duct, vent, chimney, or other exhaust duct.

•Make sure the dryer has adequate access to outside fresh air to ensure proper operation. The opening for outside fresh air must be at least 25 in2 (163 cm2).

•It is important that the clearance of the duct from any combustible construction be at least 2 in. (5 cm), and when venting the dryer to the outdoors, the dryer can be installed with a clearance of 1 in. (2.5 cm) at the sides and back of the dryer.

•Please be aware that venting materials are not supplied with the dryer. You should obtain the venting materials necessary for proper installation.

Once you have completed the installation of the dryer and it is in its final location, confirm proper operation with the following tests.

Testing Dryer Heating

GAS MODELS

Close the dryer door, press the ON/OFF switch to turn the dryer on, and start the dryer on a heat setting. When the dryer starts, the igniter should ignite the main burner.

NOTE: If all air is not purged from the gas line, the gas igniter may turn off before the main burner ignites. If this happens, the igniter will reattempt gas ignition after approximately two minutes.

ELECTRIC MODELS

Close the dryer door, press the ON/OFF switch to turn the dryer on, and start the dryer on a heat setting. The exhaust air should be warm after the dryer has been operating for 3 minutes.

Checking Airflow

Effective dryer operation requires proper airflow. The adequacy of the airflow can be measured by evaluating the static pressure. Static pressure in the exhaust duct can be measured with

a manometer, placed on the exhaust duct approximately 2 ft. (60.9 cm) from the dryer. Static pressure in the exhaust duct should not exceed 0.6 in. (1.5 cm). The dryer should be checked while the dryer is running with no load.

Checking Levelness

Once the dryer is in its final location, recheck the dryer to be sure it is level. Make sure it is level front to back and side to side, and that all 4 leveling feet are firmly on the floor.

DLE2101S, DLE2101R, DLE2101W, D2102S, D2102W specifications

LG Electronics has established itself as a leader in home appliances, and its range of dryers, particularly the models DLE2101L, D2102R, D2102L, and D2102W, showcases the brand's commitment to innovation and performance.

The LG DLE2101L is a sleek and stylish electric dryer known for its capacity and efficiency. This model can handle large loads, making it ideal for families. One of its main features is the Sensor Dry technology, which detects moisture levels in clothing and automatically adjusts drying time for optimal results. This not only prevents over-drying but also helps save energy. The dryer also boasts a TurboSteam feature that helps eliminate wrinkles and odors from clothes, ensuring they come out looking and smelling fresh.

In terms of design, the DLE2101L offers a streamlined black steel finish that can complement any laundry room. Its easy-to-use control panel comes with various drying cycles and settings, including a delicate cycle for fabrics that require special care. Additionally, the TrueSteam technology is particularly beneficial for reducing allergens, making it a great choice for allergy sufferers.

LG’s D2102 series, which includes the D2102R, D2102L, and D2102W models, showcases additional versatility. These dryers come with a range of colors and finishes, including white and graphite steel, allowing for broader aesthetic integration within different home styles. Like the DLE2101L, these models feature Sensor Dry technology, ensuring that clothes are dried efficiently without wasting energy.

Moreover, the D2102 series is designed with convenience in mind. They include a large capacity drum that can handle bulky items such as comforters and bedding. The anti-wrinkle function and a rapid dry cycle ensure that laundry day is not only efficient but also allows for quick turnaround.

Another standout feature across these models is the Wi-Fi connectivity that allows users to control and monitor the dryers remotely. This integration with smart home technology means users can start, stop, and adjust settings from their smartphones—perfect for busy households.

With energy efficiency in mind, LG dryers are built with energy-saving technologies that qualify them for Energy Star ratings, highlighting their eco-friendly design. They offer reliability, modern features, and efficiencies, cementing LG Electronics as a top choice for consumer laundry solutions. Whether for everyday use or special care of fabrics, LG’s DLE2101L and D2102 series dryers deliver exceptional performance.