BASIC OPERATIONS
1 | 3 | 2 | 2 |
ENGLISH
Turning on the power
1 Turn on the power.
Notes on•When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
•If the cassette is already in the cassette compartment, tape play starts automatically. However, it is not recommended to leave the cassette in the compartment when turning off the power or ignition key. It may damage the tape head and the cassette.
2 Select the source.
FM | FM |
AM | AM |
CD-
CH
To operate the tuner (FM or AM), see pages 7 – 17.
To operate the tape, see page 18.
Only for
see pages 24 – 25.
3 Adjust the volume.
To increase the volume
To decrease the volume
Volume level appears.
4 Adjust the sound as you want. (See pages 19 – 20.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press and hold 
for more than one second.
“SEE YOU” appears, then the unit turns off.
Only forIf your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.
•See the Installation/Connection Manual (separate volume) for connection to utilize this function.
5