Connect Vent, Level Dryer, Reverse Door Swing

4.Screw the legs into the leg holes by hand. Use a wrench to finish turning the legs until the diamond marking is no longer visible.

5.Place a carton corner post from dryer packaging under each of the 2 dryer back corners. Stand the dryer up. Slide the dryer on the corner posts until it is close to its final location. Leave enough room to connect the exhaust vent.

Connect Vent

1.Using a 4" (10.2 cm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure the vent is clean. The dryer vent must fit over the dryer exhaust outlet and inside the exhaust hood. Check that the vent is secured to exhaust hood with a 4" (10.2 cm) clamp.

2.Move dryer into its final location. Do not crush or kink vent.

3.(On gas models) Check that there are no kinks in the flexible gas line.

4.Once the exhaust vent connection is made, remove the corner posts and cardboard.

Level Dryer

Check the levelness of the dryer. Check levelness first side to side, then front to back.

If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness.

Reverse Door Swing

You can change your door swing from a right-side opening to a left-side opening, if desired.

NOTE: For ease of installation, you may want to use 2 or more people to remove and reattach the dryer door.

Remove the door

1.Place a towel or soft cloth on top of the dryer or work space to protect the surface.

2.Open the dryer door. Remove the 5 screws that hold the door hinge on the front panel of the dryer.

A. Dryer front panel

B. Dryer door

C. Screws

3.Remove the door.

4.Lay the dryer door on a flat, protected surface with the inside door assembly facing up.

Remove the 5 screws to release the outer door assembly from the inner door assembly, as indicated below. See illustration. It is important that you remove only the

5 indicated screws.

5.Lift the inner door assembly off of the outer door assembly. Set the outer door assembly aside.

Reverse the hinge

1.Place the inner door, screw head side up, on the work space.

2.Remove the 4 hinge screws that hold the hinge to the door and remove hinge.

A.Hinge side screw

B.Locator pins on hinge

C.Top side screw

3.Move the large hole screw to the opposite side. Remove the 2 plug screws and plastic plugs, and insert them in the original screw holes on the opposite side.

A B C

A. Hinge screws

B. Large hole screw

C. Plug screws and plastic plugs

8789, 110.8787 specifications

The Kenmore 110.8787 and 110.8789 are prominent models in the Kenmore washing machine lineup, designed to provide efficiency, durability, and advanced cleaning performance. These machines are known for their stylish design and user-friendly features that cater to various laundry needs.

One of the standout characteristics of the Kenmore 110.8787 and 110.8789 is their capacity. With a sizable drum, these washers can accommodate larger loads, making them ideal for families or individuals who frequently wash bulky items like bedding and towels. This larger capacity not only saves time by allowing users to wash more items per load but also promotes better water and energy efficiency.

These machines feature a range of wash cycles designed to handle different fabric types and soil levels. With options such as normal, delicate, heavy-duty, and quick wash, users can customize their laundry experience based on their needs. The intuitive control panel simplifies the process, ensuring that selecting the appropriate cycle is straightforward.

Another significant technological advancement in the Kenmore 110.8787 and 110.8789 is their advanced agitation system. These washers utilize a combination of traditional agitator motion and modern washing technologies, which provide optimal cleaning performance while being gentle on clothes. The machines also incorporate smart sensors that adjust water levels and wash times according to the load size, ensuring resource efficiency.

Energy efficiency is a key selling point for both models, which are designed to consume less water and electricity compared to older washing machines. With ENERGY STAR certifications, users can expect lower utility bills without compromising on performance. The durable construction of the Kenmore 110.8787 and 110.8789 also means that these machines are built to last, featuring high-quality components that withstand regular use.

In addition to performance and efficiency, convenience features such as delay start, end-of-cycle signal, and lint filters make these washers very user-friendly. The sleek design fits well in any laundry room environment, enhancing aesthetics while providing top-notch functionality.

In summary, the Kenmore 110.8787 and 110.8789 washing machines stand out for their impressive capacity, multiple wash cycles, energy efficiency, and thoughtful design. Whether tackling everyday laundry or dealing with particular items, these machines offer a reliable and effective solution for all household washing needs.