Kenmore 110.8787, 8789 manual Dryer Care

Page 25

DRYER CARE

Cleaning the Dryer Location

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor for a garage installation.

Failure to do so can result in death, explosion, or fire.

Cleaning the Lint Screen

Every load cleaning

The lint screen is located in the door opening of the dryer. The control panel has an indicator light to remind you to clean the lint screen before each load. A screen blocked by lint can increase drying time.

To clean

1.Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

2.Push the lint screen firmly back into place.

IMPORTANT:

Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load is completely dry. The screen is probably clogged if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months, or more frequently, if it becomes clogged due to a residue buildup.

To wash

1.Roll lint off the screen with your fingers.

2.Wet both sides of lint screen with hot water.

3.Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4.Rinse screen with hot water.

5.Thoroughly dry lint screen with a clean towel. Replace screen in dryer.

Cleaning the Dryer Interior

To clean dryer drum

1.Make a paste with powdered laundry detergent and very warm water.

2.Apply paste to a soft cloth.

OR

Apply a liquid, nonflammable household cleaner to the stained area and rub with a soft cloth until all excess dye and stains are removed.

3.Wipe drum thoroughly with a damp cloth.

4.Tumble a load of clean cloths or towels to dry drum.

NOTE: Garments that contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to avoid dye transfer.

Removing Accumulated Lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Vacation and Moving Care

Vacation care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

1.Unplug dryer or disconnect power.

2.Clean lint screen. See “Cleaning the Lint Screen.”

25

Image 25
Contents Electric Dryer Protection Agreements Table of ContentsONE Year Limited Warranty Kenmore Elite Appliance WarrantyYour safety and the safety of others are very important Dryer SafetyTools and Parts Installation InstructionsOptional Pedestal Dryer Dimensions Installation clearancesCustom undercounter installation Dryer only Location RequirementsMobile home additional installation requirements Installation spacing for cabinet installationCloset installation Dryer only Mobile home installations requireIt is your responsibility Electrical RequirementsElectrical Connection Style 1 Power supply cord strain relief Power Supply Cord Direct WireElectrical Connection Style 2 Direct wire strain relief Wire connection Power supply cordRemove center silver-colored terminal block screw Wire connection Direct wireBDE CG F Optional 3-wire connection Venting Requirements If using an existing vent systemIf this is a new vent system Vent material Alternate installations for close clearances Optional exhaust installationsPlan Vent System Install Leveling Legs Install Vent SystemSpecial provisions for mobile home installations Vent system chartLevel Dryer Connect VentReverse Door Swing Remove the doorReinstalling the door Complete InstallationReverse the door handle If the dryer will not start, check the followingStarting Your Dryer Dryer USETo use an Auto Cycle To make changes during an Auto CycleStopping Your Dryer Pausing or RestartingControl Locked Drying and Cycle TipsCycles Status LightsOptions Changing Cycles, Options and Modifiers ModifiersEnd of Cycle Signal End of Cycle SignalTumble Free Heated Dryer Rack Dryer Care Changing the Drum Light TroubleshootingDryer Operation Dryer Results Contratos DE Protección ÍndiceContratos Maestros de Protección Servicio de Instalación de SearsGarantía Limitada DE UN AÑO Garantía DE LOS Electrodomésticos Kenmore EliteSu seguridad y la seguridad de los demás es muy importante Seguridad DE LA SecadoraHerramientas y piezas Instrucciones DE InstalaciónPedestal opcional Requisitos de ubicaciónEspacios para la instalación Dimensiones de la secadoraInstalación en el clóset Sólo secadora Espacio para la instalación en un armario Requisitos eléctricosUsted es responsable de Las instalaciones en casas rodantes necesitanSi emplea un cable de suministro eléctrico Conexión eléctricaSi el contacto de pared luce como éste Si hace la conexión con cableado directoCable de suministro eléctrico Conexión eléctricaCable directo Estilo 2 Protector de cables para cable directo Conexión de 4 hilos Cable de suministro eléctricoTornillo conductor de tierra externo Conexión de 4 hilos Cable directoConexión de 3 hilos Cable directo Conexión de 3 hilos Cable de suministro eléctricoConexión opcional de 3 hilos Si usa un sistema de ventilación existente Requisitos de ventilaciónSi éste es un nuevo sistema de ventilación Instalaciones alternas para espacios limitados Instalaciones opcionales de escapeDeterminación de la vía del ducto de escape Instalación del sistema de ventilaciónCuadro del sistema de ventilación Conexión del ducto de escape Instalación de las patas niveladorasNivelación de la secadora Inversión del cierre de la puertaInversión de la manija de la puerta Inversión de la bisagraReinstalación de la puerta Complete la instalaciónSi la secadora no funciona, revise lo siguiente Puesta en marcha de la secadora USO DE LA SecadoraPara usar un ciclo de secado automático Pausa o reanudación de la marcha Detención de la marcha De la secadoraControl bloqueado Sugerencias de ciclos y secadoCiclos Luces de estadoSecado expreso Express DRY Pantalones de mezclilla JeansInformal Casual Ropa delicada DelicateModificadores OpcionesSeñal de fin de ciclo Cambio de ciclos, opciones y ModificadoresEstante térmico de la secadora Limpieza del filtro de pelusa Cuidado DE LA SecadoraLimpieza de cada carga Limpieza según la necesidadEliminación de pelusa acumulada Limpieza del interior de la secadoraCambio de la luz del tambor Funcionamiento de la secadora Solución DE ProblemasResultados de la secadora Pelusa en la ropa El tiempo del ciclo es demasiado cortoManchas en la carga o en el tambor Ropa arrugadaW10114657

8789, 110.8787 specifications

The Kenmore 110.8787 and 110.8789 are prominent models in the Kenmore washing machine lineup, designed to provide efficiency, durability, and advanced cleaning performance. These machines are known for their stylish design and user-friendly features that cater to various laundry needs.

One of the standout characteristics of the Kenmore 110.8787 and 110.8789 is their capacity. With a sizable drum, these washers can accommodate larger loads, making them ideal for families or individuals who frequently wash bulky items like bedding and towels. This larger capacity not only saves time by allowing users to wash more items per load but also promotes better water and energy efficiency.

These machines feature a range of wash cycles designed to handle different fabric types and soil levels. With options such as normal, delicate, heavy-duty, and quick wash, users can customize their laundry experience based on their needs. The intuitive control panel simplifies the process, ensuring that selecting the appropriate cycle is straightforward.

Another significant technological advancement in the Kenmore 110.8787 and 110.8789 is their advanced agitation system. These washers utilize a combination of traditional agitator motion and modern washing technologies, which provide optimal cleaning performance while being gentle on clothes. The machines also incorporate smart sensors that adjust water levels and wash times according to the load size, ensuring resource efficiency.

Energy efficiency is a key selling point for both models, which are designed to consume less water and electricity compared to older washing machines. With ENERGY STAR certifications, users can expect lower utility bills without compromising on performance. The durable construction of the Kenmore 110.8787 and 110.8789 also means that these machines are built to last, featuring high-quality components that withstand regular use.

In addition to performance and efficiency, convenience features such as delay start, end-of-cycle signal, and lint filters make these washers very user-friendly. The sleek design fits well in any laundry room environment, enhancing aesthetics while providing top-notch functionality.

In summary, the Kenmore 110.8787 and 110.8789 washing machines stand out for their impressive capacity, multiple wash cycles, energy efficiency, and thoughtful design. Whether tackling everyday laundry or dealing with particular items, these machines offer a reliable and effective solution for all household washing needs.