JVC KS-FX732R, KS-FX772R manual Setting the TA volume level, Automatic clock adjustment

Page 15

Changing the display mode while listening to an FM station

You can change the initial indication on the display to station name (PS NAME), station frequency (FREQ) or clock time (CLOCK) while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “DISPMODE (display mode).”

3 Press + or – to set to the desired indication (“PS NAME,” “FREQ” or “CLOCK”).

4 Press SEL (select) to finish the setting.

Note:

By pressing DISP (display), you can change the display while listening to an FM RDS station.

Each time you press the button, the following information appears on the display:

Station name

(PS NAME)

Programme type

(PTY)

Station frequency

(FREQ)

Clock time

(CLOCK)

•Then, the display goes back to the original indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL (volume).”

3 Press + or – to set to the desired volume. You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ (adjustment).”

3 Press – to select “OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by pressing +.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

ENGLISH

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents KS-FX772R/KS-FX732R How to use the number buttons How to reset your unitContents Location of the Buttons Control panelDisplay window Basic Operations Turning on the powerTo drop the volume in a moment To turn off the powerRadio Basic Operations Listening to the radioSearching a station automatically Auto search When an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while M is flashing FM station automatic preset SSM Manual presetSelect the FM band FM1 3 you want to store FM stations into FM1 FM2 FM3 Tuning in to a preset stationRDS Operations What you can do with RDSTo use Network-Tracking Reception To deactivate the TA Standby Reception, press Using TA Standby ReceptionUsing PTY Standby Reception To store your favorite programme types Press and hold TP/PTY for more than SecondsPress and hold TP/PTY for more than Select one of the PTY codes To search your favorite programme typeSeconds while listening to an FM StationSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station Science PTY codesTo fast-forward or rewind a tape Tape OperationsListening to a cassette To stop play and eject the cassetteSkipping the blank portions on the tape Press + to select onDuring playback To cancel the prohibition and unlock Playing the current tune repeatedlyProhibiting cassette ejection VOL Sound AdjustmentsAdjusting the sound BASSCM OFF Beat Soft POP Using the sound control memory SCMRecalling the sound modes Selecting and storing the sound modesRepeat the same procedure to store other sound modes Storing your own sound adjustmentsTo reset to the factory settings Call up the sound mode you want to adjustSetting the clock To check the current clock time or change the display modeOther Main Functions Selecting the color of the display window Changing the general settings PSMBasic Procedure Select the color you want Finish the setting24H/12H Preferred Setting Mode PSM itemsTo select the level meter Level To cancel Advanced SCM SCM LinkTo select the telephone muting TEL To select the changer display CH DispAttaching the control panel Detaching the control panelSelect the CD automatic changer CD-CH CD Changer OperationsPlaying CDs To fast-forward or reverse the trackRPT1 RPT2 Selecting CD playback modesTo go to a particular disc directly RND1 RND2Select the external component CD-CH External Component OperationsWhat is DAB system? To tune in to a particular ensemble without searching Storing DAB services in memoryTo restore the FM/AM tuner Ensemble name Channel number Frequency Band/Preset numberSelect the DAB band DAB1, DAB2 or DAB3 you want Tuning in to a preset DAB serviceSymptoms Causes Remedies TroubleshootingReset button of the CD changer Ignition key-off release/Ignition key-on play MaintenanceTo clean the heads To keep the tape cleanLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation?

KS-FX732R, KS-FX772R specifications

The JVC KS-FX772R and KS-FX732R are two car stereo receivers that stand out for their blend of innovative features, advanced technology, and user-friendly design. Both models are part of JVC's commitment to delivering high-quality audio performance that enhances the driving experience.

Starting with the KS-FX772R, this model is equipped with a powerful built-in amplifier that delivers exceptional sound quality and clarity. Its four-channel output ensures that every seat in the vehicle can enjoy a balanced audio experience. One of the standout features of the KS-FX772R is its compatibility with various audio sources. It supports CD playback, AM/FM radio, and input options via USB and auxiliary ports, allowing users to connect their smartphones and other devices seamlessly.

The KS-FX732R shares many similarities with its counterpart but has a more compact design that fits effortlessly into most vehicles. While it may not have the same power output as the KS-FX772R, it still provides clear and vibrant sound, making it an excellent choice for everyday listening. Both models feature a user-friendly interface with an illuminated display that makes navigation easy, even in low-light conditions.

A significant highlight for both the KS-FX772R and KS-FX732R is their support for various audio formats. They can play MP3 and WMA files, which means users can bring their favorite music on-the-go without any hassle. Furthermore, the built-in preamp outputs allow for easy expansion to external amplifiers and subwoofers if users wish to upgrade their audio system in the future.

In terms of ergonomics, both models come with substantial control buttons and a rotary knob that provides tactile feedback, making it easier to control volume and settings while driving. The FM tuner also offers exceptional reception capabilities, ensuring that users can easily find and enjoy their favorite radio stations.

In conclusion, the JVC KS-FX772R and KS-FX732R car stereos present a compelling combination of audio performance, connectivity options, and user-friendly design. Whether one opts for the more powerful KS-FX772R or the compact KS-FX732R, both models promise an enhanced in-car audio experience that caters to the modern driver’s needs.
Top Page Image Contents