Finding the beginning of a tune Other convenient tape functions
ENGLISH
Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune.
During playback
Specify how many tunes ahead of or before the current tune the one you want is located.
Press ¢ to locate a tune
ahead of the current tune on the
¢
cassette.
4
Press 4 to locate a tune before the current tune on the cassette.
Skipping the blank portions on the tape
You can skip blank portions between the tunes (Blank Skip).
When this function is on, the unit skips blank portions of 15 seconds or more,
•See also “Changing the general settings (PSM)” on page 24.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 25.)
S E L
2 Press ¢ or 4 to select “B. SKIP (blank skip).”
Each time you press the buttons, the number changes up to ±9.
When the beginning of the specified tune is located, playback starts automatically.
¢
4
Notes:
•While locating a specified tune:
–If the tape is rewound to its beginning, playback starts from the beginning of that side.
–If the tape is
•In the following cases, the Multi Music Scan function may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level of noise or humming between tunes.
–Tapes with tunes recorded at low recording levels.
3 Press + to select “ON.”
Now Blank Skip is activated.
4 Finish the setting.
S E L
To cancel Blank Skip, repeat the same procedure
and select “OFF” in step 3 by pressing
18