Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
DAB FM/AM
FM1 FM2 FM3 AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢or 4 until “M (manual)” starts flashing on the display.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.
When an FM stereo broadcast is hard to receive:
1Press MODE to enter the functions mode while listening to an FM stereo broadcast.
2Press MO (monaural), while still in the functions mode, so that the MO indicator lights up on the display.
MODE | MO |
ENGLISH
¢
4
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
To restore the stereo effect, repeat steps 1 and 2 so that the MO (monaural) indicator goes off.
Selected band appears.
3 Tune in to a station you want while “M” is flashing.
To tune in to stations of higher frequencies.
¢
4
To tune in to stations of lower frequencies.
7