Xerox 3119 Setting up the machine system, Overview of control panel menus, Using the save modes

Setting up the machine system

Overview of control panel menus

The control panel provides access to various menus to set up the machine or use the machine’s functions. They can be

accessed by pressing button. Refer to the following diagram.

Reduce/Enlarge
	Darkness
	Original Type
	Special Copy
		Off
		Clone
		Auto Fit
		ID Card Copy
		2 UP
		Poster
	Toner Save
	Paper Setting
		Paper Size
		Paper Type
	Copy Setup
		Default-Change
		Timeout
	Report
	Machine Setup
		Language
		Power Save
		USB mode
	Maintenance
		Clean Drum
		Clear Settings

2.6

Getting started

Changing the display language

To change the language that appears on the control panel, follow these steps:

1Press button until Machine Setup appears on the top line of the display.

2Press button when Language appears.

3Press the scroll button ( or ) to select the language you

want and press button.

4Press button to return to Standby mode.

Using the save modes

Toner save mode

Toner save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality.

1Press button until Toner Save appears on the top line of the display.

2Press the scroll button ( or ) until On appears and press

button.

NOTE: When PC-printing, you can also turn on or off Toner Save mode in the printer properties. See the Software Section.

Power save mode

Power save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.

1Press button until Machine Setup appears on the top line of the display.

2Press the scroll button ( or ) until Power Save appears

and press button.

3Press the scroll button ( or ) until On appears and press

button.

4Press the scroll button ( or ) to select the time setting

you want and press button.

5Press button to return to Standby mode.