Printers Configuration
Printers configuration has the two tabs; Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the MFP Configurator window.
Switches to Printer configuration.
Shows all of the installed printer.
Shows the status, model name and URI of your printer.
You can use the following printer control buttons:
• Refresh: renews the available printers list. |
• Add Printer: allows you to add a new printer. |
• Remove Printer: removes the selected printer. |
• Set as Default: sets the current printer as a default |
printer. |
• Stop/Start: stops/starts the printer. |
• Test: allows you to print a test page to check if the |
machine is working properly. |
Classes Tab
The Classes tab shows a list of available printer classes.
Shows all of the printer classes.
Shows the status of the class and the number of 
printers in the class.
•Refresh : Renews the classes list.
•Add Class... : Allows you to add a new printer class.
•Remove Class : Removes the selected printer class.
Scanners Configuration
In this window, you can monitor the activity of scanner devices, view a list of installed Xerox MFP devices, change device properties, and scan images.
• Properties: allows you to view and change the printer |
properties. For details, see page 23. |
Switches to Scanners configuration.
Shows the vendor, model name and type of your scanner.
Shows all of the installed scanners.
•Properties... : Allows you to change the scan properties and scan a document. See page 25.
•Drivers... : Allows you to monitor the activity of the scan drivers.
22
Using Your Printer in Linux
