3Squeeze the paper width guide, as shown and slide it to the stack of paper until it lightly touches the side of the stack.
NOTE: When using the USB connection, your machine provides two USB modes; Fast and Slow. Fast is the default mode. Some PC users may experience poor USB function in the default mode. If this occurs, select Slow mode to achieve successful results. For details about changing the USB mode, see page 9.7.
NOTES:
•Do not push the paper width guide far enough to cause the materials to warp.
•If you do not adjust the paper width guide, it may cause
paper jams.
Making connections
1Connect a USB cable to the USB connector on your machine
To the USB port on your computer
2Connect the other end of the cable to the USB port on your computer.
See your computer User’s Guide if you need help.
2.5
Getting started
Turning the machine on
1Plug one end of the supplied power cord into the power receptacle on the machine and the other end into a properly grounded AC outlet.
2Press the power switch to turn the machine on. warming up please wait appears on the display indicating that the machine is now on.
To view your display text in another language, see page 2.6.
CAUTION:
•The fuser area inside of the rear cover of your machine becomes very hot when in use. Take care not to burn your fingers when you access this area.
•Do not disassemble the machine with power on. If you do, you may receive an electric shock.
