Xerox 3119 manual Setting the time out option, UP copying, Poster copying, Display, Press Button

NOTE: If you press button or no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to Standby mode.

7 Press button to begin copying.

NOTE: You cannot adjust the copy size using the Reduce/ Enlarge menu while making a poster.

Your original document is divided into 9 portions. Each portion is scanned and printed one by one in the following order:

2

1

2-UP copying

This feature prints 2 original images reduced to fit onto one sheet of paper.

1Place the document to be copied on the document glass and close the cover.

2Press button until Special Copy appears on the top line of the display.

3Press the scroll button ( or ) until 2-UPappears and

press button.

Setting the time out option

You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel.

1 Press	button until Copy Setup appears on the top line
of the display.

4Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1.

NOTE: You cannot adjust the copying size using the Reduce/ Enlarge menu while making a 2-UP copying.

5 Press button to begin copying.

Your machine begins scanning the front side and will then display Set Next Page Press Start.

6Place the second document to be copied on the document glass.

7Press button to begin copying.

NOTE: 2-UP copying reduces your original document by 50%.

Poster copying

This feature prints an image onto 9 sheets of paper (3x3). You can paste the printed pages together to make one poster-sized document.

1 Place the document to be copied on the document glass and close the cover.

2 Press button until Special Copy appears on the top line of the display.

3Press the scroll button ( or ) until Poster appears and

press button.

4Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1.

5Press button to begin copying.

4.3

Copying

2	Press the scroll button (		or	) until Timeout appears and
	press	button.
3	Press the scroll button (		or	) to select the time setting
	you want.

Selecting Off means that the machine does not restore the

default settings until you press button to begin

copying, or button to cancel.

4Press button to save your selection.

5press button to return to Standby mode.