Nikon COOLPIXP300BK user manual Sound Settings, Auto Off, 153, Adjust the following sound settings

Setup Menu

Sound Settings

Press the dbutton Mz(Setup menu) (A142) MSound settings

Adjust the following sound settings.

Button sound

Turn the beep and start-up sounds On (default setting) or Off. The beep sounds once when the settings are completed successfully, twice when the camera focuses on the subject, and three times when an error is detected.

Shutter sound

Choose whether to set the shutter sound to On (default setting) or Off.

BNotes on Sound Settings

•In Pet portrait scene mode, even when On is set, the button sound and shutter sound are disabled.

•Even when On is set, the shutter sound is disabled during continuous shooting or movie recording.

Auto Off

Press the dbutton Mz(Setup menu) (A142) MAuto off

If no operations are performed for a certain period while the camera is on, the monitor is turned off to save power and the camera enters standby mode (A19). This option sets the amount of time allowed to elapse before the camera enters standby mode.

Choose from 30 s, 1 min (default setting), 5 min and 30 min.

CWhen the Monitor Is Turned Off to Save Power

•The power-on lamp blinks in standby mode.

•The camera turns off when the standby mode continues for about three minutes.

•When the power-on lamp blinks, turn on the monitor again with one of the following operations.

-Press the power switch, shutter-release button, the c button or the b (emovie-record) button.

-Rotate the mode dial.

Basic Camera Setup

BAuto Off Setting

In the following situations, the time taken for the camera to enter standby mode is fixed.

•When menus are displayed: three minutes (when auto off is set to 30 s or 1 min)

•During slideshow playback: maximum of 30 minutes

• When the AC adapter EH-62F is connected: 30 minutes 153