Nikon COOLPIXP300BK Inserting the Memory Card, Formatting a Memory Card, Write Protect Switch

Inserting the Memory Card

B Formatting a Memory Card
If the message on the right is displayed when the camera is turned	Card is not formatted.
on, the memory card must be formatted before use. Note that	Format card?
formatting (A154) permanently deletes all pictures and
other data on the memory card. Be sure to make copies of any
data you wish to keep before formatting the memory card.	Yes
To format, use the rotary multi selector to choose Yes and press the	No
k button. When the confirmation dialog is displayed, choose
Format and press the k button to start formatting.

•Do not turn the camera off, or open the battery-chamber/memory card slot cover until formatting is complete.

•The first time you insert a memory card that has been used in another device into this camera, be sure to format it (A154) with this camera.

B The Write Protect Switch

When the memory card switch is in the “Lock” position, data	Write protect switch
cannot be written to, or deleted from, the memory card. If you
want to record data, delete data or format the memory card,
and the switch is in the “Lock” position, slide the switch to its
original position to unlock it.

First Steps

BMemory Cards

•Use only Secure Digital memory cards.

•Do not perform the following operations during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the memory card:

-Eject the memory card

-Remove the battery

-Turn off the camera

-Disconnect the AC adapter

•Do not use a computer to format the memory card.

•Do not disassemble or modify.

•Do not drop, bend, or expose to water or strong physical shocks.

•Do not touch the metal terminals with your fingers or metal objects.

•Do not affix labels or stickers to the memory card.

•Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.

•Do not expose to humidity, dust, or corrosive gases.

23