Yamaha 5TE-F8197-10 Checking a Switch Shown in the Manual, Example chart shows that

CHECKING THE SWITCHES

ELEC – +

R Br/L R Br

OFF

ON

Br	R
Br/L	R

CHECKING THE SWITCHES

CHECKING A SWITCH

Use a pocket tester to check the terminals for continuity. If the continuity is faulty at any point, replace the switch.

Pocket tester:

P/N. YU-03112-C, 90890-03112

NOTE:

●Set the pocket tester to “0” before starting the test.

●The pocket tester should be set to the “Ω ⋅ 1” range when testing the switch for continuity.

●Turn the switch on and off a few times when checking it.

CHECKING A SWITCH SHOWN IN THE MANUAL

The terminal connections for switches (main switch, handlebar switch, engine stop switch, light switch, etc.) are shown in a chart similar to the one on the left.

This chart shows the switch positions in the column and the switch lead colors in the top row.

For each switch position, “” indicates the terminals with continuity.

The example chart shows that:

There is continuity between red and brown/ blue, and between red and brown when the switch is set to “ON”.

9 - 2