Yamaha LIT-11616-16-02 Replacing the Front Brake Pads, Brake pad wear limit 1 mm 0.04

FRONT BRAKE

CHAS

CAUTION:

Disc brake components rarely require

disassembly. DO NOT:
● disassemble	components	unless
absolutely necessary;
● use solvents	on internal	brake
components;

●use spent brake fluid for cleaning; (use only clean brake fluid)

●allow brake fluid to come in contact with the eyes, as this may cause eye injury;

●splash brake fluid onto painted surfaces or plastic parts, as this may cause damage;

●disconnect any hydraulic connection, as this would require the entire brake system to be disassembled, drained, cleaned, properly filled and bled after reassembly.

REPLACING THE FRONT BRAKE PADS

NOTE:

It is not necessary to disassemble the brake caliper and brake hose to replace the brake pads.

1.Measure:

●Brake pad wear limit a

Out of specification → Replace the brake pads as a set.

Brake pad wear limit: 1 mm (0.04 in)

2.Install:

●Brake pads

●Brake pad spring

NOTE:

Always install new brake pads, brake pad shim and brake pad spring as a set.

8 - 7