7 - 24
DRIV
REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
Ring gear stopper clearance adjustment
1.Remove:
●Ring gear 1
●Ring gear stopper 2
●Shim(s) 3
4Bearing housing
ÈLeft-hand threads
2.Select:
●Suitable shim(s)
Shim
Thickness (mm) 0.10 0.15 0.20
0.30 0.40 0.50
3.Install:
●Shim(s)
●Ring gear stopper (left-hand threads)
●Ring gear
N
OTE:
Use LOCTITE on the ring gear stopper.
T
R
.
.
9 Nm (0.9 m • kg, 6.5 ft • lb)
4.Measure:
●Ring gear stopper clearance
Out of specification → Repeat adjustment
steps.
CHECKING THE REAR AXLE
1.Check:
●Rear axle runout a
Out of specification → Replace.
WARNING
Do not attempt to straighten a bent axle.
Ring gear stopper clearance:
0.30 ~ 0.60 mm (0.012 ~ 0.024 in)
Rear axle runout limit:
1.5 mm (0.06 in)