Invacare M50, M51, M61 Removing/Installing the Seat Positioning Strap, Adjusting the Seat Position

SECTION 7—ASBA SEAT

Mounting Screws

Seat Frame Plate

1-inch	1-inch
Adjustment	Adjustment
Spacers	Spacers
	Seat Pivot
	Washers
	Locknuts

DETAIL “A” - SEAT ADJUSTMENT

POSITIONS

1-inch

Forward Position

Standard 1-inch

Position Rearward

Position

FIGURE 7.6 Adjusting the Seat Position

Removing/Installing the Seat Positioning Strap

NOTE: For this procedure, refer to FIGURE 7.7 on page 67.

1.Remove the seat cushion from the seat pan.

2.Move the flip back armrests out of the way.

3.Remove the two mounting screws, quick release pin tabs, spacers, and locknuts that secure the seat pan and seat positioning straps to the seat frame.

4.Remove the two halves of the seat positioning strap from the rear seat frame.

5.Reposition the two new seat positioning strap halves underneath seat rails.

6.Reinstall the two mounting screws, quick release pin tabs, spacers, and locknuts that secure the seat pan and seat positioning straps to the seat frame and torque to

75 in-lbs.

7.Reinstall the seat cushion onto the seat pan.

Pronto® Series 66 Part No. 1125075