SECTION 13—ELECTRONICS
Mounting Bracket
(Threaded Plate)
Washers
Arm Tube
Hex Mounting Screws
Joystick
Adjustment Lock Lever
Mounting Bracket
Joystick Mounting Tube
FIGURE 13.3 Repositioning the Joystick Mounting Bracket - ASBA Seat
Disconnecting/Connecting the Joystick
NOTE: For this procedure, refer to FIGURE 13.4 on page 124.
Disconnecting
1.Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and disconnect them by pulling them apart.
Connecting
CAUTION
The joystick connector and controller connector fit together in one way only. DO NOT force them together.
1.Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and align them.
2.Lightly push to engage the joystick connector and the controller connector.
Part No. 1125075 | 123 | Pronto® Series |
