21-1678.fm Page 5 Thursday, August 5, 1999 12:45 PM

PREPARATION

CONNECTING POWER

You can power your transceiver from any of three sources:

Internal batteries (not supplied)

Vehicle battery power (using an optional DC cig- arette lighter power cord)

Standard AC power (using an optional DC power supply)

Note: Connecting a DC power cord automatically disconnects internal batteries.

Using Internal Batteries

You can power your transceiver with nine AA batter- ies. For the longest operation and best performance, we recommend alkaline batteries (such as Cat. No. 23-552). Or, you can use rechargeable nickel- cadmium batteries (Cat. No. 23-125).

Follow these steps to install or replace batteries.

1.If the transceiver is on, turn VOLUME/OFF coun- terclockwise until it clicks to turn it off.

2.Remove the battery compartment cover by slid- ing it in the direction of the arrow.

illustration

3.Remove any old batteries from the compart- ment.

Cautions:

Always dispose of old batteries promptly and properly.

5

Page 5
Image 5
Radio Shack TRC-234 owner manual Preparation, Connecting Power