21-1678.fm Page 9 Thursday, August 5, 1999 12:45 PM
Follow these steps to power the transceiver from AC power.
1.Using the double-sided foam tape supplied with the cigarette lighter accessory outlet, mount the accessory outlet to the DC power supply.
2.Insert the power cord’s barrel plug into the trans- ceiver’s DC13.8V CHARGE jack.
Note: If you installed rechargeable nickel-cad- mium batteries in the transceiver, connect the power cord to the DC13.8V CHARGE jack and be sure the NI/AL switch is set to NI. This powers the transceiver and recharges the batteries at the same time. See “Charging Nickel-Cadmium Batteries.”
3.Insert the cigarette lighter plug on the DC power cord into the cigarette lighter accessory outlet.
4.Connect the DC power supply to a standard AC outlet.
9
