CONNECTING THE MACHINE TO POWER SOURCE
Caution: Always make sure that the machine is unplugged from power source and the main switch is on “O”. when the machine is not in use and before inserting or removing parts.
-Connect the machine to a power source as illustrated (1/2).
-The power switch is located above the socket. Your machine will not operate unless this switch is on “ I “. (1)
-Sewing light turns on automatically when the main switch is on “I“.
-To start the machine, press on the foot control (3). The speed of the machine is regulated by the amount of pressure put on the foot control.
Attention: Consult a qualified electrician if in doubt as to connect machine to power source. Unplug power cord when machine is not
in use.
The appliance must be used with the foot controller:
-For USA and Canada,
-For Australia, 240V:
-For Europe,
For the USA and Canada
This appliance has a polarized plug (one blade wider than the other), to reduce the risk of electrical shock; this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
8
