BLIND HEM
For hems in curtains, trousers, skirts, etc.
Blind hem for woven fabrics. Position “C” on selection dial.
Blind hem for stretch fabrics. Position “D” on selection dial.
Set the machine as illustrated.
Note: It takes practice to sew blind hems. Always make a test on scraps.
Fold the fabric as illustrated with the wrong side up. (1)
Place the fabric under the foot. Turn the handwheel towards you by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the stitch width accordingly. (2) Adjust the guide (3) by turning the knob (4) so that the guide just rests against the fold. Sew slowly, by pressing the foot control lightly. Guide the fabric along the edge of the guide.
a.Stitch width
b.Stitch length
c.Presser foot
d.Stitch pattern
25
