THREADING THE UPPER THREAD
Caution: Before threading, turn power switch to “O”.
Raise the needle bar to its highest position. Follow exactly the numbered threading sequence illustrated below. If you skip a step or fail to properly engage the thread in
any of the thread guides, the machine will not sew properly.
1. Place spool on spool pin with felt underneath.
2. Bring thread to the left behind and around first thread guide.
3. Bring the thread down into the right slot, under the guide and up in left slot.
4. Bring thread over and
forward into the
5.Slide thread into wire guide above the needle.
6.Thread the needle from front to back. Leave about 10 cm (4”) of thread loose behind the needle. (6)
Bring the thread under the presser foot and up into the thread cutter.
a. Spool pin felt
15
