SECTION 7—ASBA SEAT
Pronto® Series 60 Part No. 1125075
FIGURE 7.1 Removing/Installing the Seat Assembly
Adjusting the Seat Height

M50/51 Wheelchairs Only

NOTE: For this procedure, refer to FIGURE7.2 on page 61.
NOTE: The seat can be adjusted to five height positions in 1-inch increments.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 59.
2. Remove the mounting screw that secures the seat post to the support tube.
WARNING
Refer to the table in FIGURE 7.2 on page 61 for proper seat post mounting
positions. For users over 220 lbs - Mounting holes 3, 4 and 5 (in FIGURE 7.2) MUST
be used with the seat in the 1-inch back position (FIGURE 7.2). Refer to Adjusting
the Seat Position on page 65.
3. Adjust the seat post to desired mounting position.
Seat
Assembly
Seat Lever Seat Post