SECTION 5—ARMS

Adjustable Width Arm

Lock

Arm Support

Knob(s)

Tube

 

FIGURE 5.1 Removing/Installing Van Seat Arm and Adjusting Van Seat Arm Width

Adjusting Van Seat Arm Angle

WARNING

Pinch point may occur when adjusting the arm angle position.

NOTE: For this procedure, refer to FIGURE 5.2 on page 46.

1.Lift-up the armrest.

2.Loosen the jam nut.

3.Adjust the socket screw up or down to the desired arm angle position.

4.Tighten the jam nut.

5.To determine the same angle for the opposite armrest, count the exposed threads after the jam nut has been tightened.

6.Repeat STEPS 1-5 for opposite armrest, if necessary.

Adjusting Van Seat Arm Height (Adjustable Height Arms Only)

NOTE: For this procedure, refer to FIGURE 5.2 on page 46.

1.Remove the lock knob that secures the armrest to the arm frame assembly.

2.Adjust the armrest to one of five positions in 1-inch increments.

3.Reinstall the lock knob that secures the armrest to the arm frame assembly and tighten securely.

Part No. 1125075

45

Pronto® Series

Page 45
Image 45
Invacare M50, M51, M61 service manual Adjusting Van Seat Arm Angle, Adjusting Van Seat Arm Height Adjustable Height Arms Only