
SECTION 8—FRONT RIGGINGS/FOOTBOARD
Bottom View of | Set Screw, Washer |
Footboard | and Jam Nut |
Footboard
Assembly
FIGURE 8.9 Adjusting the Footboard Assembly - Angle
Depth
NOTE: For this procedure, refer to FIGURE 8.10.
1.Remove the quick release pin that secures the footboard assembly to the wheelchair frame.
WARNING
Make sure the detent balls of the
Keep detent balls clean.
2.Adjust footboard to one of three mounting positions.
3.Install the quick release pin. Make sure the detent balls of the
Top Shroud
Three Depth
Adjustment Holes
Footboard
Assembly
Mounting
Hole
Quick | Detent |
Release Pin | Ball |
DETAIL “A” - BOTTOM VIEW OF
FOOTBOARD
Quick Release Pin
Detent Balls
Outer Edge
of Tube
FIGURE 8.10 Adjusting the Footboard Assembly - Depth
Pronto® Series | 80 | Part No. 1125075 |