SECTION
❑Ensure seat is secured to wheelchair frame.
❑Ensure seat release latch is not worn and is functional. Replace if necessary.
❑Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑Inspect for any loose hardware on the wheelchair.
❑Inspect charger AC power cord for damage. Replace if necessary.
❑Check that all labels are present and legible. Replace if necessary.
❑Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Additional Requirements for M61 Wheelchairs
❑Make sure elevate operates smoothly and properly.
❑Make sure elevate systems drive with reduced speed when seat is in elevated position.
Troubleshooting
NOTE: For additional troubleshooting information and explanation of error codes, refer to the individual electronics manual supplied with each wheelchair.
Wheels
WHEELCHAIRVEERS LEFT/RIGHT | SLUGGISHTURN/ PERFORMANCE | CASTERS FLUTTER | SQUEAKSAND RATTLES | LOOSENESS WHEELCHAIRIN | WHEELCHAIR3 WHEELS | SOLUTIONS |
|
|
|
|
|
| |
|
|
|
|
|
|
|
X | X | X |
|
|
| If pneumatic, check tires for correct and equal pressure. |
|
|
|
|
|
|
|
X | X | X | X |
|
| Check for loose stem nuts/bolts. |
|
|
|
|
|
|
|
X |
| X |
|
|
| Check that casters contact ground at the same time. |
|
|
|
|
|
|
|
About Joystick Diagnostics
The joystick information gauge and the service indicator give indications of the type of fault or error detected by the control module. When a fault is detected, the wheelchair may stop and not drive. The LEDs on the information gauge may flash in a particular pattern or the service indicator light will flash. The number or type of flashes indicates the nature of the error. If multiple errors are found, only the first error encountered by the control module will be displayed.
Pronto® Series | 20 | Part No. 1125075 |
