SECTION 4—WHEELCHAIR OPERATION

Adjusting the Speed

M50 and M51 Wheelchairs Manufactured Before 8/15/05

NOTE: For this procedure, refer to FIGURE 4.4.

1.Turn the speed control knob to adjust the speed:

Clockwise - Increase speed.

Counterclockwise - Decrease speed.

M50/M51 Wheelchairs Manufactured After 8/14/05 and All M61 Wheelchairs

NOTE: For this procedure, refer to FIGURE 4.5 on page 36.

1.Perform one of the following:

Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button ( )

or hare button ( ) to decrease/increase the speed in 20% increments. The larger bars in the speedometer will light.

Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps:

i.Press and hold both the tortoise button ( ) and hare button ( ) until the joystick beeps.

ii.Perform one of the following:

Press the tortoise button ( ) or hare button ( ) to decrease/increase the speed in 20% increments. The larger bars in the speedometer will light.

Press and hold the tortoise button ( ) or hare button () to decrease/increase the speed in smaller increments. The smaller bars in the speedometer will light.

Part No. 1125075

35

Pronto® Series

Page 35
Image 35
Invacare M61 service manual Adjusting the Speed, M50 and M51 Wheelchairs Manufactured Before 8/15/05