SECTION 5—ARMS

Adjusting the Flip Back Armrest Height

WARNING

Make sure the flip back armrest release levers and height adjustment levers are in the locked position before using the wheelchair.

NOTE: For this procedure, refer to FIGURE 5.5.

1.Unlock top of flip back armrest by pulling height adjustment lever into the up (horizontal) position.

2.Adjust top of the flip back armrest to the desired height.

3.Lock top of flip back armrest by pushing height adjustment lever into the down (vertical) position.

4.Lift up on flip back armrest to make sure the armrest is locked in place.

5.Repeat STEPS 1-4 for opposite flip back armrest, if necessary.

Height

Flip Back Armrest

Locked

Adjustment

Release Lever

(Down - Vertical)

Lever

 

 

 

 

Unlocked

Flip Back

 

(Up - Horizontal)

 

 

Armrest

 

 

Front Arm Socket

 

 

FIGURE 5.5 Adjusting the Flip Back Armrest Height

Pronto® Series

48

Part No. 1125075

Page 48
Image 48
Invacare M50, M51, M61 service manual Adjusting the Flip Back Armrest Height