SECTION
M50/M51 Wheelchairs Manufactured After 8/14/05 and All M61
Wheelchairs
NOTE: For this procedure, refer to FIGURE 4.7.
1.Press the horn button located in the center of the speed indicator. The horn will sound for as long as the button is pressed.
NOTE: SPJ+ w/ACC joystick shown. SPJ+ joystick works the same way.
Horn
Button
FIGURE 4.7 Using the Horn - M50/M51
Wheelchairs Manufactured After 8/14/05 and
All M61 Wheelchairs
Elevating the Seat
WARNING
DO NOT operate wheelchair on an incline while in an elevated position. Otherwise, the wheelchair may tip over and injury or damage may occur.
DO NOT operate the elevate function near or under a fixed object such as a table or desk.
Use only the MK5™NX w/ACC or MK660 w/ACC controller to activate the elevate function. DO NOT use any other actuator controls. Such devices may result in excess heating and cause damage to the actuator and associated wiring and could cause a fire, death, physical injury or property damage. If such devices are used, Invacare shall not be liable and the limited warranty is void.
The elevated seat option is equipped with a speed reduction safety mechanism. While the seat is in an elevated position, the safety feature slows the speed of the wheelchair by 80%. If the wheelchair operates at maximum speed while in an elevated position, DO NOT operate the wheelchair. Have the wheelchair serviced IMMEDIATELY by a qualified technician.
Part No. 1125075 | 37 | Pronto® Series |
