Appendix, Technical Specifications | Powerware IPK-0320, IPK-0318

C H A P T E R 6

APPENDIX

The appendix contains the BestLink Adapter specifications, components and diagrams, pin assignments, upgrading the firmware, service and support, and the warranty.

Table 2. Technical Specifications

CPU	AMD Am188ES - 20 MHz
Memory	512k x 8 Static RAM
	512k x 8 Flash ROM
LAN Controller	DAVICOM
Network Connection	10BaseT RJ-45 network connector
UPS Protocol	Powerware-supplied UPS communication device driver
Network Protocol	HTTP over TCP/IP
	SNMP over UDP/IP
	SMTP, ARP, RARP, and TFTP
	DHCP
Supported MIB	MIB_II and BestLink_MIB (bestpwr2.mib)
OS Supported for Shutdown	Microsoft Windows 95/98/NT/2000; Novell NetWare; Various UNIX versions
Operating Temperature	0–40 °C
Operating Humidity	10–80%, noncondensing
Power Input	External:	12 Vdc unregulated (supplied with the appropriate power supply)
	Internal:	9 Vdc unregulated
Power Consumption	External:	2.0 watts
(maximum)	Internal:	1.5 watts
Size	External: 134 mm x 81 mm x 33 mm
	Internal: 130 mm x 60 mm
Weight	External:	170 gm
	Internal:	80 gm
Regulatory	FCC Part 15, CISPR A, UL, cUL, and CE
BestLink SNMP/WEB Adapter User’s Guide : LTM-1343 B Draft 10/03/2001			27

Image 33

Powerware IPK-0320, IPK-0318, IPK-0319 manual Appendix, Technical Specifications

Contents

Bestlink SNMP/WEB Adapter Requesting a Declaration of Conformity Class a EMC StatementsFCC Part EN50091-2 Page Page Table of Contents Appendix Introduction System Application BestLink SNMP/WEB Adapter System Application Diagram Installing the Internal BestLink Adapter Installation Installing the Internal BestLink Adapter Installing the External BestLink Adapter Installing the External BestLink Adapter Configuration Configuring the Adapter LocallyConfiguring the Adapter Remotely Before You Start Local Configuration Cable Connection with External BestLink Adapter Connecting the BestLink SNMP/WEB Adapter BestLink SNMP/WEB Adapter Main Menu Screen SNMP/WEB Adapter Settings Screen Configuring the Adapter Exiting the Configuration Program Set Write Access Managers Set the IP Address, Gateway Address and MIB System GroupSet SNMP/WEB Card Control Group Set Trap Receivers Set UPS InformationSet IP Addresses of Primary and Secondary Date Server UPS Event Actions Set Superuser Name and Password Mail NotificationBack to Main Menu Remote Configuration Add a Routing Condition in the PCRoute add 192.168.7.18 BestLink Adapter Home Running the Web Browser Setup Network Configuration Remote Configuration UPS Power Management UPS Management from a Web BrowserBecoming a Superuser Forcing the UPS to Shut Down Turning the UPS On and Off Planning a Scheduled UPS Shutdown and Restart Configuring E-mail NotificationUPS Shutdown Schedule Mail Notification Performing a Manual UPS Battery Test Scheduling a UPS Battery TestSelect Battery Test Schedule UPS Management from an Snmp NMS Viewing the UPS History LogsViewing the UPS Status with CheckUPS-like Applet Receiving Event Traps Viewing UPS Monitoring Parameters Automatic Shutdown of UPS-Protected Computers UPS Power Management Appendix Technical Specifications External BestLink Adapter Rear Panel Adapter Components DIP Switch Modes DIP Switch DescriptionLED Description LED Definitions Pin Assignments Serial Cable Definition External BestLink Adapter to UPS Serial ConnectionExternal BestLink Adapter to PC Serial Connection Upgrading the BestLink Adapter Firmware 852-2830-3030 Service and Support Extended Service Coverage Two-Year Limited Warranty US and Canada Only Force Majeure International Limited Warranty Appendix Page LTM-1343 B