Remote Configuration
Setup Network Configuration
1.Select Configuration from the menu at the top of the home page, then
SNMP/WEB Adapter Configuration to set the BestLink Adapter parameters (see Figure 10).
2.Click Become Superuser and log in with the Username and Password (the default user name and password is admin).
Figure 10. SNMP/WEB Adapter Configuration Page
3.Select and edit the BestLink SNMP/WEB Adapter IP Address.
4.Select and edit the Gateway Address for the network.
5.Select and edit the Subnet Mask of the network.
6.Select Set Values to save the new settings.
7.Select Date and Time from the menu at the top of the page.
8.Enter the appropriate date and time information in the specified format.
9.Select Set Values to save the date and time settings.
The BestLink Adapter is now configured for operation on your network. Refer to the remainder of this user’s guide and the online help for detailed information about each menu selection.
BestLink SNMP/WEB Adapter User’s Guide : | 17 |
