Powerware IPK-0320, IPK-0318, IPK-0319 manual Installation, Installing the Internal BestLink Adapter

C H A P T E R 2

INSTALLATION

Installing the Internal BestLink Adapter

C A U T I O N

Before installing or removing the BestLink SNMP/WEB Adapter, the UPS MUST be turned off. Hot-swapping is prohibited.

To install the internal BestLink SNMP/WEB Adapter, perform the following steps:

1.Remove the BestDock cover on the UPS rear panel. Retain the screws.

2.Install one of the mounting plates on the BestLink Adapter according to your UPS model. Use the supplied screw to secure the mounting plate to the adapter.

Any one of the three tabs can be removed from the three-tab mounting plate so that the adapter fits securely into the UPS slot.

3.To prevent electrostatic discharge (ESD), place one hand on a metal surface such as the UPS rear panel.

Slide the BestLink Adapter into the open slot and secure with the screws removed in Step 1 (see Figure 2).

BestLink SNMP/WEB Adapter User’s Guide : LTM-1343 B Draft 10/03/2001 3