Installation
4.Connect an active 10BaseT cable to the network connector on the BestLink Adapter.
5.Insert the power adapter DC power plug into the power connector on the back of the BestLink Adapter (labeled 12 VDC).
6.Plug the power adapter into a UPS output receptacle.
7.Continue to the following section “Configuration.”
Cable labeled “UPS” to UPS serial port and BestLink Adapter UPS port
Set both DIP switches to the 0 (off) position
1
0
Power cable to BestLink
Adapter power inlet and
UPS receptacle
To LAN port
Figure 3. Installing the External BestLink Adapter
BestLink SNMP/WEB Adapter User’s Guide : | 5 |
