
SECTION 13—ELECTRONICS
Office Style Seat |
|
| Joystick |
Mounting Bracket and | Joystick |
| |
Adjustment Lock Lever | Mounting |
| |
| Tube |
Standard |
|
| |
Arm |
| Mounting | |
|
| Screws | |
DETAIL “A” - | Standard |
| |
LOCATIONS |
| ||
Arm | |||
| |||
|
|
Joystick
Office Style Seat
Joystick Cable
FIGURE 13.1 Removing/Installing the Joystick
Repositioning the Joystick Mounting Bracket
Van Seat
NOTE: For this procedure, refer to FIGURE 13.2 on page 122.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly.
1.Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2.Remove the joystick from the wheelchair.
3.Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4. Reposition the mounting bracket on the opposite arm frame.
Part No. 1125075 | 121 | Pronto® Series |