SECTION 10—SHROUDS AND FRAME
Screws
Shroud Mounting Holes
Frame
Side
Shroud
FIGURE 10.2 Removing/Installing the Side Shrouds
Removing/Installing the Front Shroud
NOTE: For this procedure, refer to FIGURE 10.3 on page 90.
Removing
1.Remove the two screws securing the top of the front shroud to the frame.
2.Remove the front shroud fo the frame.
Installing
1.Insert the tabs at the bottom of the front shroud into the slots in the bottom of the frame.
2.Secure the top of the front shroud to the frame using the two screws. DO NOT overtighten.
Part No. 1125075 | 89 | Pronto® Series |
