Invacare M61, M50, M51 service manual Recommended Tools, Reference Documents, Document Part Number

RECOMMENDED TOOLS

WARNING

A QUALIFIED TECHNICIAN MUST PERFORM ALL PROCEDURES IN THIS SERVICE MANUAL.

DEALERS AND QUALIFIED TECHNICIANS: DO NOT SERVICE OR OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING (1) THE OWNER’S OPERATOR AND MAINTENANCE MANUAL, (2) THE SERVICE MANUAL (IF APPLICABLE) AND (3) THE SEATING SYSTEM’S MANUAL (IF APPLICABLE). IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO SERVICE OR OPERATE THIS EQUIPMENT. OTHERWISE, INJURY OR DAMAGE MAY RESULT.

RECOMMENDED TOOLS

The following tools are recommended for servicing this wheelchair:

•Invacare Power Mobility Field Service Kit - p/n 1125222

•5mm ball head 10-inch t-handle allen wrench

•Flat tip screwdriver

•½-inch deep socket and 3/8-inch ratchet

•Small and Medium Phillips® screwdriver

•Needle nose pliers

•Wire cutters

•Tie-wrap assortment

•Dead blow hammer

•¼-inch to ½-inch wrenches

REFERENCE DOCUMENTS

DOCUMENT	PART NUMBER
M50/51/61 Owner’s Manual	1125085
MK5™NX™Electronics Manual	1110532
Quad-Link Instruction Sheet (for assemblies after 4/6/06)	1134844
MK6i™Field Reference Guide	1141471
MK6i Service Manual	1143203

NOTE: Updated versions of this manual are available on www.invacare.com.

Pronto® Series 2 Part No. 1125075