Invacare M61 service manual Adjusting the Seat Height, M50/M51 Wheelchairs

SECTION 6—VAN SEAT

Adjusting the Seat Height

M50/M51 Wheelchairs

NOTE: For this procedure, refer to FIGURE 6.6.

NOTE: The seat can be adjusted to five height positions in 1-inch increments.

1.Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.

2.Remove the mounting screw that secures the seat post to the support tube.

WARNING

Refer to the table in FIGURE 6.8 on page 57 for proper seat post mounting positions. For users over 220 lbs - Mounting holes 3, 4 and 5 (in FIGURE 6.6) MUST be used with the seat in the 1-inch back position (FIGURE 6.8). Refer to Adjusting Seat Position on Seat Base on page 56.

3.Adjust the seat post to desired mounting position.

4.Reinstall mounting screw. Securely tighten.

5.Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50.

Seat Post	1
	2
	3

Support Tube

4

5

Mounting Screw

NOTE: Batteries and shrouds not shown for clarity.

Mounting Positions

FIGURE 6.6 Adjusting the Seat Height - M50/M51 Wheelchairs

Part No. 1125075 53 Pronto® Series