SECTION 11—BATTERIES
8.Connect joystick cable (not shown). Refer to Disconnecting/Connecting the Joystick on page 123.
Top Shroud
BLACK Battery | Battery Handle |
Connectors |
|
Rear Battery | RED Battery Connectors |
| |
| BLACK Controller |
Joystick | Connector |
| |
Cable | Plug into |
| Controller |
Rear of |
|
Wheelchair | Front |
| |
Wheelchair | Battery |
| |
Base Frame |
|
Front of
Wheelchair
FIGURE 11.2 Removing/Installing Batteries from/into Battery Tray
Connecting/Disconnecting Battery Cables
Connecting Battery Cables
WARNING
NEVER allow any of your tools and/or battery cables to contact both battery terminals at the same time. An electrical short may occur and serious personal injury or damage may occur.
Connect same color connectors to each other (RED to RED, BLACK to BLACK).
DO NOT remove fuse or mounting hardware from POSITIVE (+) battery cable mounting screw. To replace the fuse, obtain and replace battery harness with fuse.
The POSITIVE (+) battery cable MUST connect to the POSITIVE (+) battery terminal, otherwise serious damage will occur to the electrical system.
The use of rubber gloves is recommended when working with batteries.
Part No. 1125075 | 101 | Pronto® Series |
