
SECTION 8—FRONT RIGGINGS/FOOTBOARD
3.Secure telescoping front rigging at desired depth with existing two mounting screws, spacers, and locknuts. Securely tighten.
NOTE: The two telescoping front rigging supports can be positioned at different depths.
Mounting
Screws
Spacer | Depth Mounting | Telescoping Front | |
| |||
| Positions | Rigging Support | |
Locknut |
|
| |
Seat |
| Depth Mounting | |
Spacer | Positions | ||
Frame | |||
|
| ||
| Locknut |
|
FIGURE 8.7 Adjusting/Replacing Telescoping Front Rigging Supports
Removing/Installing the Footboard Assembly
WARNING
Pinch point may occur when rotating the footboard assembly.
NOTE: For this procedure, refer to FIGURE 8.8 on page 79.
Removing
1.Remove the quick release pin that secures the footboard assembly to the wheelchair frame by depressing the button while sliding the pin out.
2.Remove the footboard assembly from the wheelchair frame.
Pronto® Series | 78 | Part No. 1125075 |