SECTION
SPJ Information Gauge Display Diagnostics
DISPLAY | DESCRIPTION | DEFINITION | COMMENTS |
| All three LEDs are Off. | Power is Off. |
|
INVACARE |
|
|
|
All three LEDs are On. | Power is On. | Fewer than three LEDs |
|
| On implies reduced |
|
| battery charge. |
INVACARE |
|
|
RED LED is flashing. | Battery charge is low. | The batteries should be |
|
| charged as soon as |
|
| possible. |
INVACARE |
|
|
Left to Right “chase” | Joystick is in | The steady LEDs indicate |
alternating with steady | programming, inhibit | the current state of the |
display. | and/or charging mode. | battery charge. |
INVACARE |
|
|
GREEN LED is flashing. | Joystick is in Speed Limit | The current state of |
| mode. | battery charge will be |
|
| displayed at the same |
INVACARE |
| time. |
All LEDs are flashing slowly. Joystick has detected Out- | Release the joystick back |
to Neutral. | |
mode. |
|
INVACARE
All LEDs are flashing quickly.
Joystick has detected a fault.
Joystick uses Flash codes to indicate faults.
INVACARE
Pronto® Series | 22 | Part No. 1125075 |
