Yamaha 5TE-F8197-10, LIT-11616-16-02 Types of Bulbs, Checking the Condition of the Bulbs

CHECKING THE BULBS AND BULB SOCKETS

ELEC

– +

EB801020

CHECKING THE BULBS AND BULB SOCKETS

Check each bulb and bulb socket for damage or wear, proper connections, and also for continuity between the terminals.

Damage/wear → Repair or replace the bulb, bulb socket or both.

Improperly connected → Properly connect. Incorrect continuity reading → Repair or replace the bulb, bulb socket or both.

TYPES OF BULBS

The bulbs used on this machine are shown in the illustration on the left.

●Bulbs A and B are used for headlights and usually use a bulb holder which must be detached before removing the bulb. The majority of these bulbs can be removed from their respective socket by turning them counterclockwise.

●Bulb C is used for turn signal and tail/brake lights and can be removed from the socket by pushing and turning the bulb counterclockwise.

●Bulbs D and E are used for meter and indicator lights and can be removed from their respective socket by carefully pulling them out.

CHECKING THE CONDITION OF THE BULBS

The following procedure applies to all of the bulbs.

1.Remove:

●Bulb

9 - 6